Accepta 6060 is a high performance, highly concentrated solid chemical boiler treatment product scientifically formulated for the off-line / pre-commission cleaning of new and existing boilers, boilers systems and closed re-circulating water systems.
Accepta 6060 is an off-line and pre-commission cleaner for new and existing boilers; and closed re-circulating water systems.
Accepta 6060 is designed to remove mill scale, oil and grease; and other unwanted materials that may cause fouling prior to commissioning or re-commissioning a boiler or closed water system.
Accepta 6060 comprises a small (0.45kg) solid chemical baton wrapped in a water soluble bag.
Accepta 6060 is packaged in cases containing 24 x 0.45kg water-soluble batons, each baton being enclosed in a sealed cardboard tube.
Each case weighs 10.9kg.
- Innovative solid chemical technology
- High performance off-line / pre-commission cleaner for new and existing boilers and closed re-circulating water systems
- Removes mill scale, oil and grease; and other unwanted materials that may cause fouling prior to commissioning or re-commissioning
- Small, light weight handy baton sized product
- Ideal for smaller systems
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 – 55oC|
|Bulk density:||998 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||10.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6060 at the rate of 1 stick (0.45kg) for every 190 litres of water volume. Always follow the system manufacturers recommended cleanout/boil-out procedures.
Accepta 6060 contains alkaline materials. Users should carefully monitor pH during product usage as it may increase to excessive levels. Care should also be taken to avoid contact with copper at high pH levels.
Accepta 6060 may cause foaming when fed at high levels.
Add Accepta 6060 directly into shot feeder or open tank as advised.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6060 please contact Accepta.