Multi-functional Boiler Treatments
To ensure that such steam boiler systems are well maintained and operate at optimum efficiency it is essential that the correct water conditions are maintained at all times.
Multi-Treatment Boiler Chemicals
If you are a water treatment specialist, FM or maintenance company who regularly resells water treatment products to your customers why not apply to become an Accepta Registered Reseller.
Popular Multi-Functional Treatment Products
Easy to use sulphite based multi-functional liquid for low and medium pressure boilers
Easy to use sulphite based multi-functional liquid for softened low and medium pressure boilers in areas of high natural alkalinity
High alkali content tannin & polymer-based liquid. Ideal for low alkalinity waters in low pressure and heritage steam applications
Low alkali content tannin & polymer-based liquid. Ideal low pressure and heritage steam applications where there isn’t much need for alkalinity building
Boiler Chemical Dosage Form
Complete as much of this form as possible to get your bespoke boiler chemical dosage treatment recommendations.
Choosing your Multi-functional Boiler Treatment
Multi-functional Boiler Water Chemicals provide the advantage of containing a blend of essential treatments such as an Oxygen Scavenger, Polymer Treatment & Alkalinity Builder to provide a multi-treat solution, this may mean they can be dosed exclusively but in many situations, they may still need to be supplemented by a Phosphate and Amine Treatment. If your application requires treatment with DEHA or Carbohydrazide these can be found on the Oxygen Scavenger category.
A Steam Boiler treatment program should always include an oxygen scavenger and polymer treatment. It is typical to also include a phosphate treatment especially in applications above 10 bar (150 psi). While it is always necessary to control the alkalinity, where the makeup water is reliably softened the regular use of an alkalinity builder may not be necessary.
Tannin or Sulphite?
When it comes to corrosion prevention in an industrial steam boiler the two main oxygen scavengers in use are Sulphite or Tannin both of which are highly effective inhibitors. However both have distinct advantages over the other in certain situations and applications. Starting with Sodium Sulphite (also expressed as Sulfite), this is recommended for applications where live steam comes into contact with the product. While a good boiler treatment program should not allow for priming or carryover, should this occur a tannin treatment program may spoil or stain where boiler water is carried into the process. This is the same reason for food processing where Sulfite treatment is the FDA approved solution.
However, for other applications where steam does not come into contact with the process, Tannin has distinct advantages over Sulphite. One of the clearest advantages is control, taking a look at the chart it is clear that the Sulfite reserve measured remains flat until the oxygen demand has been overcome. Once the demand is satisfied a reserve is very quick to establish in fact overdosing is all too easy because of this tipping point. With Tannin, chemical reserves are present immediately and build up gradually making treatment simpler.
Another major difference between these treatments is the effect on TDS, when dosed into the feed water line Tannin does not add to the dissolved solids in the boiler water, unlike Sodium Sulfite. This reduces the amount of blowdown required to keep the boiler running at recommended TDS, a Sulphite program can increase annual fuel cost by as much as 1.5% over Tannin. Reduced blowdown saves energy and chemical offering a cost advantage over a Sulphite treatment program.
Additional Tannin Benefits
- Has a dual mechanism to protect industrial boilers from corrosion by producing a corrosion resistant gamma-ferric oxide iron tannate film which covers the metal surfaces.
- Tannin is recommended for protection of boilers which often sit idle.
- Protection level can be gauged simply by measuring the colour of the boiler water.
- Tannin is much more cost effective where feedwater temperatures are low because lower dosages are required.
- More cost effective where make-up water TDS is lower.
Ready to talk about water treatment?
Please complete this form and we will be in touch