CB-AWT185 is a blended liquid treatment based on sulphite which combines the functions of oxygen scavenger, phosphate treatment and sludge conditioner.
It is an ideal single treatment for low pressure steam boilers using softened make-up water in areas with high natural alkalinities
|pH:||6 – 7|
|Solubility||Soluble in water|
|Relative Density:||1.10 approx|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
CB-AWT-185 reacts with oxygen to form products which have no adverse effect on boiler integrity. One of these products enhances protection against caustic embrittlement.
CBAWT-185 should be dosed in relation to dissolved oxygen and hardness content of the feedwater and to maintain a reserve of approximately 50 – 100 ppm of sulphite in the boiler.
Your Accepta representative will advise the exact dosage required for your application.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Please contact Accepta for advice on the exact dosage required for your application.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.