Corrosion Inhibitor, Dispersant, Cleaner & Copper Metal Inhibitors for Closed Systems – 3034 Bottle

Packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Description

Corrosion Inhibitor with Molybdate Tracer for Closed Circuit Water Systems - Bottle

Accepta 6034 is a high performance, highly concentrated solid chemical corrosion inhibitor with additional dispersant, cleaner and copper metal inhibitors scientifically formulated for the treatment and protection of closed loops and closed circuit water systems.

Accepta 6034 is a stand-alone treatment for corrosion inhibition in closed water systems and uses the very latest corrosion inhibition technologies to provide excellent corrosion control for both chilled water and hot water boiler systems.

Accepta 6034 contains no nitrites or molybdate.

Accepta 6034 contains silicates, borax, acrylates, phosphino corrosion inhibitors, dispersant/cleaner, and copper metal inhibitors.

Accepta 6034 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Accepta 6034 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance corrosion inhibitor for closed loop water systems
  • Excellent corrosion control for both chilled water and hot water boiler systems
  • Contains additional dispersant, cleaner and copper metal inhibitors
  • Can be used as a stand-alone treatment
  • Nitrite and molybdate free product
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Tan to brown amorphous solid
Odour: Slight characteristic odour
Softening point: 49 – 55 oC
Bulk density: 1197 kg/m3
Solubility in water: Complete but dissolves slowly
pH (1% solution): 8.5 – 9.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 6034 can be used at a federate of 0.36kg per 1800 litres of water capacity (200 ppm).

Testing & Control

Organo phosphonate test kits suitable for monitoring and controlling the use of Accepta 6034 are available from Accepta.

Monitor at 15 – 20 ppm.

Feeding

Feed Accepta 6034 using an Accepta board system.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6034 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg