English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

EPA Registered Oxidising Biocide for Cooling Systems - Bottle

EPA Registered Oxidising Biocide for Cooling Systems - Bottle

Accepta 6022 is a high performance; highly concentrated solid chemical EPA registered oxidising biocide scientifically formulated for the treatment of potable water, cooling water systems and other water systems.

Accepta 6022 is an isocyanurate-stabilised, dry source of chlorine and is approved by the US EPA for use in controlling the growth of bacteria and algae in potable water, industrial re-circulating cooling water systems, air washers, evaporative condensers, cooling towers; and wastewater discharges.

Accepta 6022 is available in fully recyclable plastic bottles each containing 2.3kg of concentrated solid chemical.

Accepta 6022 is packaged in cases containing 4 x 2.3kg bottles.

Each case weighs 9.1kg.

Accepta 6022 contains Sodium Dichloroisocyanurate Dihydrate.

Use with Accepta 6019

Accepta 6022 is an activator for residual bromide from DBNPA degradation. When Accepta 6019 is used as a cooling tower microbiocide it decomposes to bromide ion. When supplemented with Accepta 6022, the bromide ion in the re-circulating water is activated to hypobromous acid, effectively introducing an excellent algaecide.

Both Accepta 6019 and Accepta 6022 are US EPA registered, thereby providing an excellent oxidising and non-oxidizing bio program.

Stand-Alone Use

Accepta 6022 can be used in a stand-alone capacity as a chlorine source.

Product Benefits

  • Innovative solid chemical technology
  • High performance oxidising biocide
  • Highly effective for the control of bacteria and algae in potable water, industrial re-circulating cooling water systems, air washers, evaporative condensers, cooling towers; and wastewater discharges
  • US EPA registered
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: White granules or tablet-form product
Odour: Mild chlorine-like
Boiling point/range: Not applicable
Melting point/range: Not applicable
Flash point: Not applicable
Solubility in water: 24-25 mg/100ml
Density: 0.974 g/mL
pour density: 1.083 g/mL kg/L
pH: Not available
Decomposition temperature: Begins to lose 1 mole water at approximately 50°C;
second mole water at 95°C;
Decomposes at 240-250°C

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

For industrial re-circulating cooling water systems dosage rates forAccepta 6022 will be dependent on the conditions of the system prior to treatment. Systems that are heavily contaminated should be cleaned prior to product use.

Apply Accepta 6022 to maintain a free halogen residual in the re-circulating water.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

Testing & Control

Test kits suitable for monitoring and controlling the use of Accepta 6022 are available from Accepta.


Feed Accepta 6022 using an Accepta board system.

For further technical assistance concerning Accepta 6022 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 6022 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 6022

Popular Solid Chemical Treatment Products

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.