Accepta 3511 is a high performance, multi-purpose cleaning gel that cleans, polishes and deodorises in a single application.
Accepta 3511 is a specially blended gel containing soft soaps and anionic detergents with natural pine oil in water, to leave a fresh aroma after use.
Accepta 3511 contains no free alkali or abrasives and will not scratch or stain.
Accepta 3511 is idea for use as a general hard surface cleaner, a floor maintenance polish and as a sanitiser for ceramic and vitreous ware.
- Highly effective multi-purpose cleaner, polisher and deodoriser
- Non-hazardous soft gel containing soaps and anionic detergents
- Will not scratch or stain surfaces
- No need for rinsing
- Contains natural pine to leave a fresh aroma after use
|Boiling point:||100 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For general hard surface cleaning Accepta 3511 should be diluted 1:80 (10-15 g/litre) in warm water and the solution applied by cloth, sponge or disposable towel. There is no need to rinse off.
For Floor maintenance, Accepta 3511 can used either as described above, buffing the dry film after use, or by spray cleaning using a dilution of 1:20 (50 g/litre) and wet polishing the misted finish.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 3511 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 3511 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: