Accepta 2604 is a high performance, all-in-one boiler water treatment based on organic tannin.
Accepta 2604 is an excellent corrosion and scale inhibitor scientifically formulated using hydrolysable tannin as an oxygen scavenger and is designed for the treatment of small boilers.
- High performance all-in-one water treatment formulation for small boilers.
- Based on hydrolysable tannin.
- Offers excellent corrosion and scale inhibitor performance.
- Excellent system protection.
|pH:||4.0 - 5.0|
|Specific Gravity:||1.01 - 1.05|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2604 is 30 - 60 ppm as PO43- in boiler water.
Accepta 2604 should be fed neat or as part of an appropriate mix to the boiler feedwater system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2604 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Phosphate Checkit kit k (comparator)
- Tannin Drop test
- Phosphate Colour disc / Total PO4
- Tannins Colour Disc / Tannin/Lignin
Material of Compatibility
|MS :||Not Recommended|
Safety, Storage & Handling
Accepta 2604 is an acidic solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2604 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: