Accepta 2606 is a high performance, all-in-one boiler water corrosion and scale inhibitor treatment scientifically formulated using sulphite as an oxygen scavenger.
Accepta 2606 is an excellent combined corrosion and scale inhibitor based on sulphite as an oxygen scavenger.
Accepta 2605 is designed for the treatment of small boilers.
- High performance all-in-one water treatment formulation for small boilers.
- Based on sulphite.
- Offers excellent corrosion and scale inhibitor performance.
- Excellent system protection.
- Ideal for small boilers.
|Colour:||Pink / clear|
|pH:||12.00 - 13.00|
|Specific Gravity:||1.22 - 1.26|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range is for Accepta 2606 is 30 - 60 ppm as Na2SO3 in the boiler water.
Accepta 2606 should be fed neat or as part of an appropriate mix to the boiler feedwater system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2606 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Sulphite Drop test
- Sulphite Drop test / Iodometry
Material of Compatibility
Safety, Storage & Handling
Accepta 2606 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2606 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: