Accepta 2609 is a high performance boiler water alkalinity builder scientifically formulated to maintain boiler feed water pH and alkalinity within a recommended operating range.
Accepta 2609 aids the control of feed water pH and boiler system alkalinity.
- High performance boiler water alkalinity builder.
- Offers excellent boiler feed water pH control.
- Convenient liquid product.
|Specific Gravity:||1.25 – 1.75|
|Freezing Point:||7°C (45°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2609 is as required to maintain boiler feedwater pH within 9.5 – 11.5 and 10.5 – 12.0 for low and high pressure boilers respectively.
Accepta 2609 should be fed neat or as part of an appropriate mix to the boiler feedwater system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2609 following the above dosing strategy should result in pH correction to the required level in the boiler feedwater.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- pH Extech Stick pH meter
- pH Minilab pH meter and buffers
Material of Compatibility
Safety, Storage & Handling
Accepta 2609 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2609 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: