Accepta 2301 is a highly efficient polymeric cationic microbiocide scientifically formulated for the control of bacteria and algae in cooling water and related cooling systems, swimming pools and spas.
Accepta 2301 is a non-foaming micro-biocide ideally suited for use in cooling waters to control algae and aerobic and anaerobic bacteria over a wide pH range.
Accepta 2301 may also be used to control microbial problems in swimming pools and spas.
- Excellent microbiocide suitable for the control of bacteria and algae in cooling water systems.
- Good performance over a wide pH range.
- Non-foaming product.
- Suitable for use in swimming pools and spas.
|Appearance:||Almost colourless liquid|
|Solubility in water:||Miscible in water|
|Solubility in other solvents:||Not determined|
|Boiling point/boiling range:||~ 100oC|
|Flash Point:||>100oC (closed cup)|
|Relative density:||~ 1.04|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Periodic dosage of Accepta 2301 is recommended to establish and maintain a reserve for approximately 4 hours of 20-200ppm depending on the severity of the contamination.
Accepta 2301 can be used alone or in combination with our other non-oxidising biocides or chlorine release agents.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2301 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: