Description
Accepta 2067 is a high performance, sodium lauryl sulphate based reverse osmosis (RO) membrane detergent scientifically formulated for the cleaning and removal of colloidal material and organic matter from RO membrane systems.
A high-performance product, Accepta 2067 was developed specifically for the removal of colloidal material and organic matter from RO membranes and systems.
Accepta 2067 is proven to give superior cleaning results when used at 25oC.
Product Benefits
- High performance reverse osmosis membrane detergent formulation
- Superior results removing colloidal material and organic matter
- Most effective used at 25oC
Product Properties
Appearance: | Amber liquid |
Odour: | Mild |
Specific gravity: | 1.043 |
pH: | 7 (1%) |
Flash point: | None |
Solubility in water: | Complete |
Viscosity: | 900 Cps (20 °C) |
*Full details of the product properties are available on the MSDS
Application & Dosage Information
Typical dosing regime for Accepta 2067 is as follows. Make up a 1.0% solution of Accepta 2067 and 0.5% sodium hydroxide to give a pH of 13.0.
The cleaning cycle is then about 1 hour, longer if heavily fouled.
After cleaning, rinse the RO membranes with good quality water.
Discard the permeate for the first 15 minutes of operation.
Our technical consultants will advise you of the ideal level of dosage and testing regime for your individual system
It is advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Contact Accepta technical support for additional technical advice.