Accepta 0026 is a new and highly advanced corrosion inhibitor scientifically formulated to control ferrous and non-ferrous metal corrosion using anodic and cathodic site pacifiers in hot water heating systems and closed cooling / chilled water systems.
Accepta 0026 will control both ferrous and non-ferrous metal corrosion at elevated temperatures and under a variety of water conditions and flow velocities.
Accepta 0026 provides protection to systems containing ferrous metals, copper, copper alloys, zinc by utilising a blend of powerful inhibitors operating at a neutral pH.
Experience has shown that this product gives excellent protection to hot water heating systems, and closed cooling / chilled water systems.
- Highly advanced corrosion inhibitor formulated with both anodic and cathodic site pacifiers.
- Liquid product facilitates easy handling and dosing.
- Provides effective protection to all system metals including zinc and copper alloys.
- Contains no metallic elements.
|Odour:||Slight amine like|
|pH:||6.0 – 7.0|
|Relative density:||1.125 – 1.175|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 0026 can be introduced to the system by pump to a suitable dosing point, via a dosage pot or via the system header tank.
The system should be cleaned and passivated prior to the introduction of product to minimise the risk of blockages and the potential for under deposit corrosion.
Providing there is no loss of water from the system, only occasional make-up doses are normally required to ensure continuing protection to the system. If make-up water is necessary, this should be dosed at the same treatment level as the initial dose immediately.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
A simple test kit is available to monitor, control and maintain correct levels of Accepta 0026 in the system water.