Accepta Neutralising Powder – Alkali pH Correction

You are here:

£95.60 ex. VAT

5-8

17%

DISCOUNT

9-16

25%

DISCOUNT

17-31

30%

DISCOUNT

32+

33%

DISCOUNT

Prices are for 25kg Pails

Chemical in powder form

Suitable for use with DS-PWDR / AT-2316 & DS-SF / AT-2317

Description

ACCEPTA NEUTRALISING POWDER is a powdered alkali used for pH correction of effluent after acid cleaning.

The pH of any effluent stream should be adjusted to within the necessary consent levels (typically pH 6-10).

Suitable for

Cooling Water Systems

Boiler Water Systems

Product Usage

ACCEPTA NEUTRALISING POWDER should be added gradually to the effluent with mixing until the desired pH is achieved.

Neutralisation should be carried out in a separate tank and not in the system which has been acid cleaned since this may result in precipitation of the dissolved scale.

ACCEPTA NEUTRALISING POWDER can, however, be used to remove residual acidity after a system has been drained.

Guidance for the use of this chemical in a heat exchanger descale can be found here.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 2316 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Description

ACCEPTA NEUTRALISING POWDER is a powdered alkali used for pH correction of effluent after acid cleaning.

The pH of any effluent stream should be adjusted to within the necessary consent levels (typically pH 6-10).

Suitable for

Cooling Water Systems

Boiler Water Systems

Product Usage

ACCEPTA NEUTRALISING POWDER should be added gradually to the effluent with mixing until the desired pH is achieved.

Neutralisation should be carried out in a separate tank and not in the system which has been acid cleaned since this may result in precipitation of the dissolved scale.

ACCEPTA NEUTRALISING POWDER can, however, be used to remove residual acidity after a system has been drained.

Guidance for the use of this chemical in a heat exchanger descale can be found here.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 2316 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch