Accepta 8302 is a superior quality, high-performance liquid aluminium sulphate based primary coagulant available in an aqueous solution. It is scientifically formulated for the treatment of a range of commercial, municipal and industrial process wastewaters and effluents.
Accepta 8302’s excellent performance characteristics make it ideal for use in industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries.
Accepta 8302 is an effective primary coagulant based on trivalent aluminium and is virtually iron-free.
Accepta 8302 is used for the treatment of potable water as well as process water, and sewage and industrial effluents.
Aluminium sulphate works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.
Fields of Application
Accepta 8302 has a wide range of applications including:
- Industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries
- Treatment of potable and process water
- Paper sizing agent
- Water recycling
- High performance primary coagulant based on trivalent aluminium
- Excellent for potable and process water treatment
- Virtually iron-free
- Promotes more efficient sludge digestion and dewatering
- Paper sizing agent
- Good control of variable raw water quality
- Reduce your chemical treatment cost
|Melting point/freezing point:||< 5 °C (< 41 °F)|
|Boiling point, initial boiling point:||> 100 °C (> 212 °F)|
|Density:||1.28 – 1.32 @ 20oC|
|Viscosity:||18.6 cP @ 20 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 8302 should be dosed directly via a suitable acid-resistant dosing pump into raw, wastewater or stock flow.
Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.
The optimum dosage should be determined in each application using standard jar test procedure.
Accepta 8302 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.
For further application advice regarding Accepta 8302 please contact us.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.