Aluminium Hydroxide Chloride – High Performance Coagulant – 8304

You are here:

This product has a minimum order quantity of 1000l

Supplied in IBCs or tanker transfer

POA

Description

Accepta 8304 is a high performance; aluminium hydroxide chloride based coagulant scientifically formulated for the treatment of industrial and process wastewater and effluent.

Accepta 8304’s excellent performance characteristics make it ideal for use in industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries.

Accepta 8304 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes. Importantly it also promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8304 is a highly cationic aluminium polymer present in high concentration, which is represented as:

 [Al13O4(OH)24(H2O)12]7+

Fields of Application

Accepta 8304 has a wide range of applications including:

  • Industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries
  • Treatment of process water
  • COD reduction
  • Treatment of oil contaminated water
  • Paper processing (retention aid)
  • Water recycling

Product Benefits

  • High cationic charge / performance
  • Excellent clarified water quality
  • Very low sludge volume
  • Enhanced coagulation
  • Low temperature storage stability

Product Properties

Physical state: Liquid
Form: Liquid
Al2O3: 10% (w/w)
Basicity: 65%
Charge: +1250
Colour: Colourless to light yellow
Odour: Not significant
pH: 1.5 – 2.5
Melting point/freezing point: < 0 °C (< 32 °F)
Boiling point, initial boiling point: 100 – 120 °C (212 – 248 °F)
Density: 1.25 – 1.35 g/cm3 @ 20 oC
Solubility (water): Miscible

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8304 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8304 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

For further application advice regarding Accepta 8313 please contact us.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Description

Accepta 8304 is a high performance; aluminium hydroxide chloride based coagulant scientifically formulated for the treatment of industrial and process wastewater and effluent.

Accepta 8304’s excellent performance characteristics make it ideal for use in industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries.

Accepta 8304 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes. Importantly it also promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8304 is a highly cationic aluminium polymer present in high concentration, which is represented as:

 [Al13O4(OH)24(H2O)12]7+

Fields of Application

Accepta 8304 has a wide range of applications including:

  • Industrial effluent treatment including wastewaters from food, dairy, oil, textiles and chemical industries
  • Treatment of process water
  • COD reduction
  • Treatment of oil contaminated water
  • Paper processing (retention aid)
  • Water recycling

Product Benefits

  • High cationic charge / performance
  • Excellent clarified water quality
  • Very low sludge volume
  • Enhanced coagulation
  • Low temperature storage stability

Product Properties

Physical state: Liquid
Form: Liquid
Al2O3: 10% (w/w)
Basicity: 65%
Charge: +1250
Colour: Colourless to light yellow
Odour: Not significant
pH: 1.5 – 2.5
Melting point/freezing point: < 0 °C (< 32 °F)
Boiling point, initial boiling point: 100 – 120 °C (212 – 248 °F)
Density: 1.25 – 1.35 g/cm3 @ 20 oC
Solubility (water): Miscible

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8304 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8304 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

For further application advice regarding Accepta 8313 please contact us.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch