23% Aluminium Hydroxide Chloride – General-Purpose Coagulant – 8308

You are here:

This product is only available to order in 1300Kg IBC

Supplied as IBC or tanker transfer

Price on Application

Description

Accepta 8308 is a high performance;  Aluminium Hydroxide Chloride (Aluminium Chloro Hydrate) based general-purpose coagulant scientifically formulated for use in industrial and municipal effluent treatment applications including wastewaters from food and dairy processing, oil, textiles and chemical industries.

Accepta 8308 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8308 is a highly cationic aluminium polymer present in low concentration, which is represented as:

  [Al13O4(OH)24(H2O)12]7+

  • High cationic charge / performance
  • Fixing agent
  • Neutralises anionic charge
  • Minimal pH depression
  • Low temperature storage stabilityFields of Application

The most important fields of application for Accepta 8308 are:

  • Paper processing
  • Fixing agent
  • Turbidity/suspended solids reduction
  • Charge neutralisation
  • Catalysts

Product Properties

 

Form: Low odour, slightly yellow solution
Al2O3: 23 %
Chloride 8 %
Basicity: 83 %
pH at 20°C: 4.0 – 4.5
Density at 20°C: 1.32 – 1.35 g/cm³
Charge: +2500 µeq/kg

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8308 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended.

Dosing installation should be installed in such way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8308 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further application advice please contact us.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Description

Accepta 8308 is a high performance;  Aluminium Hydroxide Chloride (Aluminium Chloro Hydrate) based general-purpose coagulant scientifically formulated for use in industrial and municipal effluent treatment applications including wastewaters from food and dairy processing, oil, textiles and chemical industries.

Accepta 8308 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8308 is a highly cationic aluminium polymer present in low concentration, which is represented as:

  [Al13O4(OH)24(H2O)12]7+

  • High cationic charge / performance
  • Fixing agent
  • Neutralises anionic charge
  • Minimal pH depression
  • Low temperature storage stabilityFields of Application

The most important fields of application for Accepta 8308 are:

  • Paper processing
  • Fixing agent
  • Turbidity/suspended solids reduction
  • Charge neutralisation
  • Catalysts

Product Properties

 

Form: Low odour, slightly yellow solution
Al2O3: 23 %
Chloride 8 %
Basicity: 83 %
pH at 20°C: 4.0 – 4.5
Density at 20°C: 1.32 – 1.35 g/cm³
Charge: +2500 µeq/kg

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8308 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended.

Dosing installation should be installed in such way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8308 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further application advice please contact us.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch