Aluminium Hydroxide Chloride – General Purpose Coagulant – 8303

You are here:

Minimum order quantity 1000l

Supplied in IBCs or tanker transfer

POA

Description

Accepta 8303 is a high performance; aluminium hydroxide chloride based general-purpose coagulant scientifically formulated for industrial effluent treatment applications including wastewaters from food and dairy processing, oil, textiles and chemical industries.

Accepta 8303 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8303 is a highly cationic aluminium polymer present in low concentration which is represented as:

    [Al13O4(OH)24(H2O)12]7+

Fields of Application

Accepta 8303 has a wide range of applications including:

  • Industrial and municipal effluent treatment
  • Organic load reduction
  • Turbidity/suspended solids reduction
  • Paper sizing applications
  • Phosphate reduction

Product Benefits

  • Low cationic charge
  • Low sludge volume
  • Low temperature performance
  • Low temperature storage stability

Product Properties

Appearance: Aqueous solution
Physical state: Liquid
Form: Slightly viscous
Al2O3: 10% (w/w)
Basicity: 5-10%
Cationic Charge: +250
Colour: Yellow
Odour: Not significant
pH: < 1
Melting point/freezing point: < 0 °C (< 32 °F)
Boiling point, initial boiling point: 100 – 120 °C (212 – 248 °F)
Density: 1.20 – 1.30 g/cm3 @ 20 oC
Solubility (water): Miscible

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8303 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8303 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

For further application advice regarding Accepta 8313 please contact us.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Description

Accepta 8303 is a high performance; aluminium hydroxide chloride based general-purpose coagulant scientifically formulated for industrial effluent treatment applications including wastewaters from food and dairy processing, oil, textiles and chemical industries.

Accepta 8303 works by neutralising the negative charge on suspended and colloidal matter to produce compact flocs suitable for easy removal by either settlement or flotation processes and promotes more efficient sludge digestion and dewatering.

The active component in Accepta 8303 is a highly cationic aluminium polymer present in low concentration which is represented as:

    [Al13O4(OH)24(H2O)12]7+

Fields of Application

Accepta 8303 has a wide range of applications including:

  • Industrial and municipal effluent treatment
  • Organic load reduction
  • Turbidity/suspended solids reduction
  • Paper sizing applications
  • Phosphate reduction

Product Benefits

  • Low cationic charge
  • Low sludge volume
  • Low temperature performance
  • Low temperature storage stability

Product Properties

Appearance: Aqueous solution
Physical state: Liquid
Form: Slightly viscous
Al2O3: 10% (w/w)
Basicity: 5-10%
Cationic Charge: +250
Colour: Yellow
Odour: Not significant
pH: < 1
Melting point/freezing point: < 0 °C (< 32 °F)
Boiling point, initial boiling point: 100 – 120 °C (212 – 248 °F)
Density: 1.20 – 1.30 g/cm3 @ 20 oC
Solubility (water): Miscible

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 8303 should be dosed directly via suitable acid-resistant dosing pump into raw, wastewater or stock flow.

Dilution prior to dosing is not recommended. Dosing installation should be installed in such a way that uniform mixing is achieved.

The optimum dosage should be determined in each application using standard jar test procedure.

Accepta 8303 is compatible with most cationic polymers but stability tests should be carried out in individual applications. Coagulation pH will depend on the application but is usually in the range 5.8 to 8.0 and preferably 6.5 to 7.0.

For further application advice regarding Accepta 8313 please contact us.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch