Online Cleaner & Scale Remover for Boilers & Cooling Systems – 6201

You are here:

£750.00£999.00 ex. VAT

Available in Bottle, Disk or Stick form

  • Accepta 6201: 4 x 5.45kg Bottles
  • Accepta 6201S: 30 x 350g Sticks contained in water-soluble bags

Bottles can be dosed using an Accepta Ultra Dissolver Board

Description Below

Description

Accepta 6201 is a solid paste formulated product designed for use in open cooling system, closed loops and steam boilers.

This Solid-Concentrate is a polymeric-based, on-line cleaner and which assists in removal of deposit and scale build-up in water systems. This product uses the mechanism of dispersion (vs. acidic chelation). This product is designed to supplement cooling system scale/corrosion inhibitors and offer an alternative to the use of dangerous mineral acids.

BENEFITS OVER ACID

  • Improves use, handling and shipping safety
  • Eliminates exposure to hazardous chemicals
  • Eliminates risk of cleaning-related corrosion
  • Eliminates cost of down-time and start-up
  • Eliminates need fore re-passivation
  • Increases productivity – no shut down required
  • No need to raise system water temp to clean gives energy saving
  • With no spent acid there is no disposal cost

APPLICATION & DOSAGE

Depending upon the severity of the scale/deposit build-up, usage rates vary from 20-2000 ppm in the system water. Care should be taken, when cleaning, to prevent clogging of screens, strainers, and lines in heavily fouled systems when applying this product. In heavily fouled systems, it may be advantageous to use in conjunction with a side stream filter. This product is designed to be used on open or closed cooling systems.

PROPERTIES

Appearance:                 Solid – Beige

Odour:                         characteristic

pH:                               8.0 –  9.0 @1%

HANDLING AND STORAGE

Accepta 6201 should be kept away from oxidising agents in a cool dry area. Properly stored, the product will remain effective for 24 – 36 months. Consult Safety Data Sheet for further information

PACKAGING

Accepta 6201 is available in 5 kg containers (4 to a case).

Accepta 6201 is also available in 0.35kg Sticks.

FEEDING

Feed Accepta 6201 using an Accepta board system.

Available in three types:

  • Gravity Fed – No pump needed, requires controller relay or timer
  • Electronic Level Control – Pump needed
  • Mechanical – Pump needed

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6201 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

o request the latest MSDS for this product please fill out the form below.

Additional information

Weight N/A
Type

AT-6201 Bottle (4 Pack), AT-6201 Sticks (30 Pack)

Description

Accepta 6201 is a solid paste formulated product designed for use in open cooling system, closed loops and steam boilers.

This Solid-Concentrate is a polymeric-based, on-line cleaner and which assists in removal of deposit and scale build-up in water systems. This product uses the mechanism of dispersion (vs. acidic chelation). This product is designed to supplement cooling system scale/corrosion inhibitors and offer an alternative to the use of dangerous mineral acids.

BENEFITS OVER ACID

  • Improves use, handling and shipping safety
  • Eliminates exposure to hazardous chemicals
  • Eliminates risk of cleaning-related corrosion
  • Eliminates cost of down-time and start-up
  • Eliminates need fore re-passivation
  • Increases productivity – no shut down required
  • No need to raise system water temp to clean gives energy saving
  • With no spent acid there is no disposal cost

APPLICATION & DOSAGE

Depending upon the severity of the scale/deposit build-up, usage rates vary from 20-2000 ppm in the system water. Care should be taken, when cleaning, to prevent clogging of screens, strainers, and lines in heavily fouled systems when applying this product. In heavily fouled systems, it may be advantageous to use in conjunction with a side stream filter. This product is designed to be used on open or closed cooling systems.

PROPERTIES

Appearance:                 Solid – Beige

Odour:                         characteristic

pH:                               8.0 –  9.0 @1%

HANDLING AND STORAGE

Accepta 6201 should be kept away from oxidising agents in a cool dry area. Properly stored, the product will remain effective for 24 – 36 months. Consult Safety Data Sheet for further information

PACKAGING

Accepta 6201 is available in 5 kg containers (4 to a case).

Accepta 6201 is also available in 0.35kg Sticks.

FEEDING

Feed Accepta 6201 using an Accepta board system.

Available in three types:

  • Gravity Fed – No pump needed, requires controller relay or timer
  • Electronic Level Control – Pump needed
  • Mechanical – Pump needed

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6201 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

o request the latest MSDS for this product please fill out the form below.

Additional information

Weight N/A
Type

AT-6201 Bottle (4 Pack), AT-6201 Sticks (30 Pack)

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch