All in One Solid Boiler Treatment
Accepta 6304 is a sulphite based multifunctional boiler water treatment in solid form for softened water make-up application. This is a proprietary boiler water treatment containing catalysed sulphite, high performance sludge & scale conditioning agents and alkalinity builder.
Accepta 6304 contains only ingredients approved under the United States Food & Drug Administration Regulations Title 21, Section 173.310 Boiler Water Additives.
Accepta 6304 is available in 5.45kg jars or 8 x 2.25kg Disks
HOW MUCH TO USE
Accepta 6304 should be dosed to achieve 30-70ppm as sulphite in boiler water or as defined by BS2486:1997 and or manufacturers’ guidelines. 1 case (22kg) is equivalent to 115kg of a conventional liquid product Liquid equivalent comparative values will vary, dependent upon concentration.
|In Boiler Water
|30 – 70 ppm
|250 – 600 ppm
|See Manufacturer’s Guidelines
Appearance: Solid – light brown
pH: 10 @1%
HANDLING AND STORAGE
Accepta 6304 should be kept away from acids and oxidising agents in a cool dry area. Properly stored, the product will remain effective for 24 – 36 months. Consult Safety Data Sheet for further information
SPILLAGE AND DISPOSAL
Accepta 6304 is a solid product. In the unlikely event of a spillage, do not allow to enter water course or drains. Small spillages – dilute with plenty of water and wash to waste.
Feed Accepta 6304 using an Accepta board system.
Available in three types:
- Gravity Fed – No pump needed, requires controller relay or timer
- Electronic Level Control – Pump needed
- Mechanical – Pump needed
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 6304 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.