Description
ACCEPTA WGS
Treatment for Corrosion Control of Drinking Water Lines
Description and Use
WGS is a clear, odourless and tasteless corrosion inhibitor for the protection of drinking water and domestic water systems which is harmless at normal use levels. It is effective in controlling corrosion in pipe lines and storage tanks, particularly where supply water is either softened or naturally low in alkalinity, resulting in ‘Red Water’ and general corrosion, which can be particularly troublesome in Hospitals and Hotels.
Application
WGS will not affect the appearance or taste of water in any way. It is approved by the UK Drinking Water Inspectorate for treatment of potable water and has wide international approval.
Dosage Rates
WGS treatment should be continuously dosed to maintain a silica level of 8-10ppm above the raw water silica content.
For automatic proportional dosing the use of a packaged water meter controlled dosing set is advised.
Typical Properties
Appearance……………………………. Clear viscous liquid
Odour……………………………………. None
Freezing Point………………………… -1.5oC
Flash point…………………………….. None
pH………………………………………… >12
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.