Description
Accepta 4321 is a high performance; high molecular weight anionic latex polyacrylate based flocculant with a 10% mole charge.
Accepta 4321 is used as a flocculant for effluent systems and other processes. It can also be used in reverse osmosis applications.
Accepta 4321 is recommended for use in non-potable raw water clarification, primary and secondary effluent clarification, filtration and clarification of brine in Chlor-Soda plants where the polymer must be N free.
Product Benefits
- High performance anionic high molecular weight latex polyacrylate
- Excellent when used as a flocculant for effluent systems and other processes
- Ideal for non-potable raw water clarification, primary and secondary effluent clarification, filtration and clarification of brine in Chlor-Soda plants
- Suitable for reverse osmosis applications
Product Properties
| Molecular weight |
High |
| % charge: |
10% |
| Form: |
Viscous liquid |
| Colour: |
Milky |
| pH: |
6 – 8 @ 5 g/1 |
| Odour: |
Aliphatic |
| Approx. bulk density: |
1.03 |
| Flash point: |
Does not flash |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 4321 is best applied as a 0.01 – 0.05% solution.
NOTE – Do not exceed 1.0% strength otherwise viscosity rises rapidly.
The dosage details provided for Accepta 4321 are typical and can be refined by on site testing.
As a primary flocculant for settling use 1 to 5ppm.
For in line filtration use 1 to 5ppm.
For sewage treatment use 1 to 30ppm.
For oily waste water clarification use 1 to 10ppm.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.
