Description
Accepta 4364 is a high performance; superior quality solid form anionic polymer – 50% Active.
Accepta 4364 is available in a convenient block form making it easy to use, store and handle. Also known as a flocc-block it has been specially developed to slowly dissolve directly into the effluent flow in question and flocculate the associated suspended solids. Applications are generally remote sites without any mains services available to install normal flocculant dosing systems.
Accepta polymer products have a wide range of applications such as:
- Wheel wash systems
- Open cast mining operations
- Quarrying operations
- Site run-off from stock yards and docks
- Small industrial facilities
- Drainage from construction sites
- Moorland run-off containing high colour & colloidal matter
- Stone cutting operations
Product Benefits
- High performance anionic polymer
- Convenient block format
- Wide range of applications
Product Properties
Form: | Gel |
Colour: | Opaque |
Setting up a treatment system
To set up a treatment system simply place the flocc-blocks either directly in the effluent stream to be treated or suspend in a wire mesh basket under an outfall if the effluent has been concentrated into a pipe-work system. This point should be in a situation of maximum turbulence so that the effluent flow rate releases the flocculant from the flocc-block and is mixed together to allow good flocculation of the substrate. Following this turbulent point should be either a settlement point of low turbulence, such as a settlement pond or lagoon or further pipe-work to gently transport the flocculated effluent to another area for settlement.
Application & Dosage Information
The usage of Accepta 4364 flocc-blocks is very site and substrate specific and is simply calculated by effectiveness by trial and error. Add the blocks until the required result is achieved then maintain that volume of product as the blocks slowly reduce in size.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance please contact Accepta.
*Full details of the product properties are available in the Safety Data Sheet. See below.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.