Accepta Odour Neutralisers are a highly effective range of scented and non-scented odour neutralizers designed to neutralise odours generated in many foods, retail, industrial, affluent, landfill, leisure and commercial environments (both internal and external).
This environmentally friendly product is harmless to humans and animals and is 100% biodegradable.
The product reacts with odour molecules and effectively eliminates them. For best performance atomise this product using hand sprayers, mechanical sprayers or other such devices.
This product can also be used in air scrubbers, emission stacks, plant outfalls, trucks for landfill spraying etc.
- Head space spraying at a concentration as low as 500:1 with water
- Direct spray onto waste material at a concentration as low as 50:1
- Direct injection into liquids at a concentration as low as 1000:1 with water
- Control of Legionella at a concentration as low as 150:1 with water
This product also eliminates tobacco smells.
Product Application Areas
Accepta odour neutalisers can be used for the reduction of malodours in a wide range of applications including:
- Transfer stations
- Effluent and sewage treatment works
- Chemical plants
This product is effective against a range of odours and will quickly neutralise both simple and complex odours including:
- Hydrogen Sulphide
- Sulphur Dioxide
- Rapidly neutralises a large range of both simple and complex odours.
- 100% Biodegradable.
- Environmentally friendly.
- Safe under CHIP/COSHH.
- Absorbs fugitive emissions.
- Sterilisation of water supply.
- Non-acidic or caustic.
- Harmless to humans/animals.
|Odour:||Fresh, Lavender, Citrus, Cherry & Non Scented|
|pH:||3-6 (in concentrate form/prior to dilution)|
|Miscibility in water:||Miscible in all proportions|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For headspace spraying over tanks, lagoons, skip areas etc. product dilution range from “100 parts water: 1 part odour neutralizer” up to “500 parts water: 1 part odour neutralizer”.
For open areas – place spray nozzles every 5 to 7 metres and spray diluted product.
For air systems (scrubbers, vents, emission stacks etc.) use 1 nozzle per 2000 – 5000 cfm airflow.
For hotel rooms, offices etc., spray product by hand as required, neat from a hand sprayer.
Use with hand sprayers, atomisers or fogging nozzles
Atomisers & Spray Nozzles
The Atomiser produces droplets by injecting water into two opposing spinning discs to create a fine mist of monodispersed uniform droplets.
Every droplet released into the atmosphere is the same size ensuring maximum efficiency. Due to the way in which the droplets are produced, the Probe Atomiser requires far less water than traditional nozzle systems, and does not require filters as it never blocks.
Available in Floor or Wall mounted units for installation, or a fully self-sufficient Mobile for areas where water and power are not readily available. Atomisers are supplied with a flow meter to enable the customer to increase or decrease the spray from 0 – 180 litres per hour. Each Atomiser will cover a distance of 20-30 metres, and installed units are available with optional oscillation up to 180 degrees.
The spay nozzle air system atomises a mixed solution of the odour and dust control agent with air and water, producing an ultra-fine, almost dry mist with exceptionally small droplet size. The ultra-light mist will remain suspended in the atmosphere for an extended period of time, ensuring maximum performance of odour control.
For further technical assistance please contact us.
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.