Description
DS-SF / AT-2317 is a high performance, hydrochloric acid based active cleaning agent and descaler that incorporates a film forming inhibitor and a coloured exhaustion indicator dye.
DS-SF / AT-2317 is a technically advanced formulated product containing a special film forming inhibitor that works to protect carbon steel, copper and brass against acid attack.
The inhibitor properties of DS-SF / AT-2317 also serve as an efficient penetrant and dispersant to enhance the effectiveness of the acid.
DS-SF / AT-2317 has the added benefit of an exhaustion indicator and can be used to effectively dissolve lime-scale (calcium carbonate) deposits, ideal for the treatment of boilers, calorifiers and heat exchangers.
IMPORTANT – DS-SF / AT-2317 should NOT be used on stainless steel, aluminium or galvanised surfaces.
Wastewater from using DS-SF can be neutralised with Accepta’s Neutralising Powder.
Product Benefits
- Technically advanced cleaner and descaler
- Contains a special film forming inhibitor
- Protects carbon steel, copper and brass from acid attack
- Contains penetrant/dispersant for enhanced performance
- Dissolves lime scale and other deposits
- Ideal for boiler, calorifiers and heat exchangers
- Contains an exhaustion indicator
Product Properties
Fprm: | Liquid |
Colour: | Red, cloudy |
Odour: | Strong fuming |
pH: | <1.0 |
Relative density: | 1.14 @15.50C |
Solubility in water: | Complete |
Boiling point: | 970C |
Flammability: | Non flammable |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Typically, DS-SF / AT-2317 can be used at strengths between 10 and 50% and at temperatures up to 80°C, the speed of reaction being enhanced by acid strength and elevated temperature.
When the acid is approaching exhaustion the colour of the solution will change from red to yellow and this indicates that more Accepta 2317 should be added.
After completion of descaling equipment should be drained and flushed thoroughly and any acid effluent neutralised.
NOTE – DS-SF / AT-2317 should NOT be used on stainless steel, aluminium or galvanised surfaces.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 2317 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.