Kintec 3260 is a high performance supplemental corrosion inhibitor scientifically formulated for the treatment and protection of yellow metals in cooling water systems.
Kintec 3260 has been developed as a concentrated organic water treatment product specific to the protection of yellow metals and is designed to supplement a primary corrosion inhibition program within open re-circulating cooling water systems and also closed loops.
- High performance corrosion inhibitor for open re-circulating cooling water systems and closed loops
- Ideal for the protection of yellow metals
- Cost effective, concentrated organic product
- Designed to supplement primary corrosion inhibition programs
- Convenient liquid product
|Clear, pale amber
|11.5 – 12.5
|1.00 – 1.10
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The target dosage range for Kintec 3260 is 20 – 200 ppm as product in the recirculating cooling water.
Kintec 3260 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Kintec 3260 following the above dosing strategy should result in a corrosion rate of less than 0.5 mpy on yellow metals.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Not applicable
Material of Compatibility
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.