Kintec 3262 is a high-performance cooling water corrosion inhibitor.
Kintec 3262 has been developed for use in the treatment and protection of open recirculating cooling water systems with high quality, very low hardness make-up water such as that from an ion exchange system.
- High performance corrosion inhibitor for open recirculating cooling water systems
- Ideal for high quality, very low hardness make-up water conditions
- Ideal for water from ion exchange systems
- Convenient liquid product
|Slightly hazy, yellow
|12.0 – 13.0
|1.23 – 1.26
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Kintec 3262 is 25 – 30 ppm as SiO2 in the recirculating cooling water as maintenance rate.
For a passivating programme, the dosage rate should be 3 times the maintenance rate and maintained for five days.
Kintec 3262 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Kintec 3262 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Silicate (SiO2) ColourCheck Comparator
- Silicate (SiO2) Colour Disc
Material of Compatibility
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.