Supersperse / AT-2321 Bio-Dispersant for Cooling Water Systems

You are here:

£310.50 ex. VAT

Quantity discount tiers

5-8

17%

DISCOUNT

9-16

25%

DISCOUNT

17-31

30%

DISCOUNT

32+

33%

DISCOUNT

Supersperse also known as AT-2321

Prices are for 25Kg Drums/Kegs. POA for 200kg/IBCs.

Is also a direct replacement for Accepta 8010

Description

Supersperse / AT-2321 is a high-performance cooling water dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including re-circulating and once-through cooling water systems.

Supersperse / AT-2321 is a high specification product developed to improve the performance of cooling water systems where fouling by microbiological slimes is reducing overall system efficiency, by removing and dispersing the unwanted deposits.

Supersperse / AT-2321 is extremely effective at controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.

Product Benefits

  • Powerful dispersant
  • Suitable for use in both re-circulating and once through cooling water systems
  • Improves the performance of cooling water systems
  • Improves system efficiency
  • Removes and disperses unwanted deposits
  • Controls oil based fouling

Product Properties

Form:  Liquid
Colour:  Clear yellow
Odour:  Slight
pH:  6.5
Relative density:  1.05
Solubility in water:  Complete
Boiling point:  ~100oC
Flash point:  >100oC

Application & Dosage Information

Supersperse / AT-2321 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.

Supersperse / AT-2321 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.

Dosage levels for Supersperse / AT-2321 will be in the range of 1 – 100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Supersperse / AT-2321 please contact Accepta.

*Full details of the product properties are available in the Safety Data Sheet. See below.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Description

Supersperse / AT-2321 is a high-performance cooling water dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including re-circulating and once-through cooling water systems.

Supersperse / AT-2321 is a high specification product developed to improve the performance of cooling water systems where fouling by microbiological slimes is reducing overall system efficiency, by removing and dispersing the unwanted deposits.

Supersperse / AT-2321 is extremely effective at controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.

Product Benefits

  • Powerful dispersant
  • Suitable for use in both re-circulating and once through cooling water systems
  • Improves the performance of cooling water systems
  • Improves system efficiency
  • Removes and disperses unwanted deposits
  • Controls oil based fouling

Product Properties

Form:  Liquid
Colour:  Clear yellow
Odour:  Slight
pH:  6.5
Relative density:  1.05
Solubility in water:  Complete
Boiling point:  ~100oC
Flash point:  >100oC

Application & Dosage Information

Supersperse / AT-2321 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.

Supersperse / AT-2321 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.

Dosage levels for Supersperse / AT-2321 will be in the range of 1 – 100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Supersperse / AT-2321 please contact Accepta.

*Full details of the product properties are available in the Safety Data Sheet. See below.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch