Description
Kintec 3302 is a high performance cooling water corrosion inhibitor developed for the treatment and protection of closed loops.
Kintec 3302 is scientifically formulated from a blend of inorganic and organic corrosion inhibitors for use in closed loop systems.
Kintec 3302 is designed for use in low/medium pressure hot water systems, and in particular those containing aluminium.
Product Benefits
- High performance corrosion inhibitor for closed loop systems
- Ideal for high low/medium pressure hot water systems
- Ideal for systems containing aluminium
- Convenient liquid product
Product Properties
| Form: |
Liquid |
| Colour: |
Clear, light brown |
| pH: |
8.0 – 8.6 |
| Specific Gravity: |
1.10 – 1.20 |
| Freezing Point: |
10°C (14°F) |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2620 is 165 – 220ppm as Mo in the closed loop water.
Dosage Strategy
Kintec 3302 should be fed neat using a chemical metering pump or via a bypass pot feeder to a system location where it can be uniformly mixed and thoroughly distributed.
Performance Monitoring
Appropriate use of Accepta 2620 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For additional assistance please contact Accepta.
Test Methods
- Molybdate Checkit kit (comparator)
- Molybdate Colour Disc
Material of Compatibility
| Material |
Comments |
| SS : |
Recommended |
| MS : |
Recommended |
| PE : |
Recommended |
| PP : |
Recommended |
| PVC : |
Not recommended |
| Teflon : |
Acceptable |
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.
