High performance, industrial antifreeze, based on mono ethylene glycol (MEG) and has the ability to protect engineered systems down to extreme temperatures as low as -50oC.
For use as an industrial grade coolant and heat transfer fluid and is suitable for use in a wide range of industries. It is, however, not recommended for use in food processing or water purification applications.
MEG has a mild odour and is miscible with water in all proportions and can protect systems down to —50oC depending on concentration.
A tracer dye or colourant can be added to MEG allowing it to act as a leak detector.
- High performance industrial antifreeze based on MEG
- Extreme temperature protection down to -50oC
- Miscible with water in all proportions
- Versatile, suitable for a wide range of applications
|Colour:||Clear very pale straw|
|pH:||6.5 – 8.5|
|Boiling point:||198oC (initial)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Dose the MEG to the system according to the operating temperature (Table.1) and the system volume, see below:
|Freezing Point oC||% v/v Product
The minimum dose ofMEG is not usually less than 20% of the system volume and the maximum does not normally exceed 60%.
We recommend the use of deionised or distilled water for this dilution.
Avoid water containing high levels of calcium salts or Chlorides [Cl–].
For further technical assistance concerning the use of this product please contact Accepta.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.