AMX / AT-2328 – Corrosion Inhibitor for Steam Condensate Lines (FDA Approved)

You are here:

£249.00 ex. VAT

Quantity discount tiers

5-8

17%

DISCOUNT

9-16

25%

DISCOUNT

17-31

30%

DISCOUNT

32+

33%

DISCOUNT

AMX also known as AT-2328

Prices are for 25Kg Drums/Kegs. POA for 200kg/IBCs.

Product can be used as a replacement for Accepta 2587 & 2550

Description

AMX / AT-2328 is a high performance corrosion inhibitor scientifically formulated for use in steam condensate lines and high pressure hot water (HPHW) systems.

AMX / AT-2328 is a neutralising amine developed for use in steam lines where the control of pH is essential.

AMX / AT-2328 reacts with acids produced in normal boiler operation, controlling pH, thus protecting pipework which would otherwise be subject to vigorous attack.

AMX / AT-2328 active component is approved by the American Food and Drugs Administration for applications other than milk production where low levels may come into contact with food. A level of 10ppm as Cyclohexylamine (25ppm as supplied) should not be exceeded if there is a risk of contact with food products.

AMX / AT-2328 may also be used in HPHW systems to raise the pH without substantially raising the conductivity.

Product Benefits

  • Excellent pH control, helping to protect vulnerable pipework.
  • High performance corrosion inhibitor based on neutralising and filming amines.
  • Approved by the US FDA* where low levels may come into contact with food.
  • Can be used in HPHW systems to raise the pH.

* other than milk production

Product Properties

Appearance: Clear colourless liquid
pH: 12 approx
Sg: 0.97 approx
 Flash point: 57 oC

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

AMX / AT-2328 has the advantage of being dosed directly into the feedwater make-up together with other chemical treatments. This is possible due to its high volatility, the vapors being carried over into the steam lines direct from the boiler ensuring an even distribution over the entire system.

A special dosing point in the boiler shell is NOT necessary.

Dosage rates are determined on site by in-situ application tests to obtain optimum conditions.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Description

AMX / AT-2328 is a high performance corrosion inhibitor scientifically formulated for use in steam condensate lines and high pressure hot water (HPHW) systems.

AMX / AT-2328 is a neutralising amine developed for use in steam lines where the control of pH is essential.

AMX / AT-2328 reacts with acids produced in normal boiler operation, controlling pH, thus protecting pipework which would otherwise be subject to vigorous attack.

AMX / AT-2328 active component is approved by the American Food and Drugs Administration for applications other than milk production where low levels may come into contact with food. A level of 10ppm as Cyclohexylamine (25ppm as supplied) should not be exceeded if there is a risk of contact with food products.

AMX / AT-2328 may also be used in HPHW systems to raise the pH without substantially raising the conductivity.

Product Benefits

  • Excellent pH control, helping to protect vulnerable pipework.
  • High performance corrosion inhibitor based on neutralising and filming amines.
  • Approved by the US FDA* where low levels may come into contact with food.
  • Can be used in HPHW systems to raise the pH.

* other than milk production

Product Properties

Appearance: Clear colourless liquid
pH: 12 approx
Sg: 0.97 approx
 Flash point: 57 oC

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

AMX / AT-2328 has the advantage of being dosed directly into the feedwater make-up together with other chemical treatments. This is possible due to its high volatility, the vapors being carried over into the steam lines direct from the boiler ensuring an even distribution over the entire system.

A special dosing point in the boiler shell is NOT necessary.

Dosage rates are determined on site by in-situ application tests to obtain optimum conditions.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.

To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg
Dimensions 30 × 23 × 47 cm

Data Sheets & enquires

To request the safety or technical data sheets on this product or simply enquire further about chemical supply please fill out this contact form.

Contact us

Please complete this form and we will be in touch