Description
Accepta 8932 are high-performance drinking water-safe water purification tablets based on chlorine that have been developed to offer a fast dissolving, convenient, safer and more accurate disinfection alternative to liquid bleach.
Accepta’s chlorine tablets are specially formulated using a dry chlorine donor, Troclosene sodium (NaDCC) which is carefully blended with reliable effervescent components to create a highly effective disinfectant product in a convenient, easy to use tablet form including potable water applications.
Accepta chlorine tablets are a safer, more effective, economic and convenient disinfectant. They are fast-acting and have a complete spectrum of biocidal activity, lethal to virtually all known pathogenic bacteria, bacterial spores, algae, fungi, protozoa and viruses.
Effective Against
- MRSA
- Clostridium difficile
- Escherichia coli
- Vibro Cholerae
- Streptococcus Faecalis
Product Benefits
- High performance effervescent chlorine tablets
- Excellent disinfection alternative to liquid bleach & drinking water safe
- Complete spectrum of biocidal activity
- Fast dissolving, rapid action – ready to use in less than 5 minutes
- Very convenient, tablet form
- Safer to use and store – no spillages or leaks
- Improved economy, more accurate disinfection – no under or over dosing
Product Properties
| Form: |
Solid tablet |
| Colour: |
White |
| Odour: |
Characteristic |
| Solubility in water: |
Soluble |
| pH: |
Diluted solution 4-6, approx 1 |
| Decomposition: |
240oC |
*Full details of the product properties are available in the Safety Data Sheet. See below.
Dosage & Application Information
Available chlorine, per tablet (mg/l or ppm) in water
| 1 Litre |
30 Litres |
50 Litres |
60 Litres |
300 Litres |
600 Litres |
| 3000 (mg/l or ppm) |
100 (mg/l or ppm) |
60 (mg/l or ppm) |
20 (mg/l or ppm) |
10 (mg/l or ppm) |
5 (mg/l or ppm) |
Emergency Water Disinfection: Dissolve 1 tablet per 200 litres of water to give 5ppm available chlorine. Leave for 30 minutes before drinking. Note: Always agitate the solution to ensure even distribution of the chlorine.
Water Tank Treatment: Dose tank to 5ppm available chlorine, leave for 5 mins then drain. Mix a 200ppm detergent sanitiser solution using a neutral detergent (non ionic or anionic but not cationic) and use to clean tank. Rinse off. Add tablets to achieve 60ppm, fill with water and leave for 16 hours. Check for a 50ppm chlorine residual then neutralise with sodium thiosulphate.
New pipe installations: Dose the pipework to 50ppm for 30 minutes, check for a chlorine residual then drain off.
For further technical assistance concerning dosage rates please contact Accepta technical support.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Request MSDS
For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet.
To request the latest MSDS for this product please fill out the form below.
