Iron Deposit Cleaner & Scale Remover for Open & Closed Loops – 6036 Baton

Packaged in cases containing 24 x 0.45kg water-soluble batons.

Each case weighs 10.9kg.


Accepta 6036 is a high performance, highly concentrated solid chemical iron deposit cleaner and scale remover scientifically formulated for the treatment and protection of both open and closed loop water systems utilising in-line filters.

Accepta 6036 is a solid citric acid/polyphos-based iron deposit cleaner and scale remover. It is engineered to aid the removal of stubborn iron deposits and scale build-up in water systems and uses the mechanism of acid and chelation.

Accepta 6036 can be used for both open and closed loops utilising in-line filters. It can also be used for system flushing to allow the removal of “in-situ” iron material.

Accepta 6036 is thermally stable and can also be used in open cooling systems.

Accepta 6036 comprises a small (0.45kg) solid chemical baton wrapped in a water soluble bag. It is designed to treat small systems where the metering of the inhibitor into the system is not practical.

Accepta 6036 is packaged in cases containing 24 x 0.45kg water-soluble batons, each baton being enclosed in a sealed cardboard tube.

Each case weighs 10.9kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance iron deposit cleaner and scale remover for for both open and closed loops
  • Excellent for systems utilising in-line filters
  • Can be be used for system flushing to allow the removal of “in-situ” iron material
  • Thermally stable and can also be used in open cooling systems
  • Small, light weight handy baton sized treatment product
  • Excellent “catch-up” solution
  • Ideal for smaller systems
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Amorphous solid
Odour: Slight characteristic odour
Softening point:
Bulk density:
Solubility in water:
pH (1% solution):

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Application rates for Accepta 6036 will vary between 20 – 2000 ppm in the system water depending upon the severity of the iron scale/deposit build-up.

When using Accepta 6036 to clean heavily fouled systems, care should be taken to prevent clogging of screens, strainers and lines.

For heavily fouled systems, it may be advantageous to use Accepta 6036 in conjunction with a side stream filter.

The starting application for Accepta 6036 is one baton (0.45kg) per 1890 litres of system volume.

Testing & Control

Test kits suitable for monitoring and controlling the use of Accepta 6036 are available from Accepta.


When dosed into an open system, operators should attempt to find a high flow area in the sump of the cooling tower or inside an accessible make-up tank.

Closed systems can be dosed using the existing by-pass feeder.

Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

For further technical assistance concerning Accepta 6036 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.

Additional information

Weight 25 kg