Accepta 4219 is a high performance; superior quality dry high molecular weight cationic polyacrylamide scientifically formulated for use in a range of industrial and process applications including the treatment of wastewater streams.
Accepta 4219 is a versatile polymer product and is particularly useful for wastewater treatment applications including belt filter, centrifuge and screw press dewatering, water clarification, filtration, thickening or use in a Dissolved Air Flotation plant.
Accepta 4219 has a mole charge of 20%.
- High performance high molecular weight cationic polyacrylamide in a granular powder form
- Accepta 4219 being a granular powder is very economical to use
- Achieves high solids capture
- Improves throughput and cake solids
|pH:||2.5 – 4.5 @ 5 g/1|
|Melting point/range:||Not applicable|
|Flash point:||Not applicable|
|Autoignition temperature:||Not applicable|
|Approx. bulk density:||0.85|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Prepare a stock solution of Accepta 4219 of up to 0.5% concentration via an automated make down unit or as a batch.
Allow solution to age for 30 to 60 minutes for maximum effectiveness.
Then use good quality make up water to give secondary dilution of at least 10:1 (clean water to stock solution). Then add as required.
AVOID the use of centrifugal pumps.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance please contact Accepta.