Multi-Metal Corrosion Inhibitor for Closed Circuit Systems – 2596

This product has been replaced by Accepta 2332

Description

Accepta 2596 is a high performance low nitrite – molybdate based multi-metal corrosion inhibitor scientifically formulated for the treatment and protection of closed circuit heating and chilled water systems.

An exceptional product, Accepta 2596 is low nitrite – molybdate based and has a neutral pH.

Accepta 2596 is compatible with ethylene glycol and propylene glycol and offers excellent corrosion control for steel, copper, brass and aluminium and is suitable for all water qualities.

Accepta 2596 is both economical to use and is the ideal corrosion treatment product for industrial and domestic central heating systems.

Product Benefits

  • High performance multi-metal corrosion inhibitor
  • Suitable for industrial and domestic heating systems
  • Protects steel, copper, brass and aluminium
  • Compatible with ethylene and propylene glycol
  • Suitable for all water qualities
  • Economical to use

Product Properties

Form: Solution
Colour: Pale straw
Odour: Slight
Specific gravity: 1.133
Specific gravity: 7.0 – 7.3
Solubility: Completely miscible

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

The system should always be clean when prior to dosing Accepta 2596.

The general dosing regime for Accepta 2596 is 1% in the system.

It is important to monitor the concentration of Accepta 2596, pH and microbiological status regularly.

Dose an isothiazolinone based closed circuit biocide (available from Accepta).

If the system is to be left standing for a prolonged period dose a higher level of treatment (e.g. 2%)

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.

Testing & Control

Test pH and molybdate (100 ppm at 1% product) using Accepta’s high range molybdate comparator method.

For further technical assistance concerning Accepta 2596 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for this product please refer to the latest Safety Data Sheet. To request the latest MSDS for this product please fill out the form below.






Additional information

Weight 25 kg