Accepta 2310 is a high performance cooling water treatment scientifically formulated using a corrosion inhibitor and antifoulant for the treatment of cooling water closed circuit systems including closed chilled water and low pressure heating systems.
If you require product selection assistance or technical advice please contact us.
Accepta 2310 is a superior nitrite based corrosion inhibitor that contains molybdate, developed for closed circuits.
Accepta 2310 is based on a highly effective blend of organic and inorganic corrosion inhibitors to protect steel, copper and other non-ferrous metals.
Accepta 2310 is the ideal treatment for closed chilled water and low pressure heating systems.
IMPORTANT – Accepta 2310 is NOT intended for use in systems containing aluminium.
- High performance corrosion inhibitor and antifoulant
- Efficient blend of organic and inorganic corrosion inhibitors
- Protects steel, copper and other no-ferrous metals
- Ideal treatment product for closed chilled water and low pressure heating systems
|Solubility in water:||Miscible|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Typically, Accepta 2310 should be dosed at 1.5-2.0 kg/m3 in order to give an active reserve of 55-75 mg/L molybdate (as Mo04).
NOTE – Accepta 2310 is NOT intended for use in systems containing aluminium.
It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
For further technical assistance concerning Accepta 2310 please contact Accepta.