Description
Accepta 2107 is a high performance nitrite based cooling water corrosion inhibitor scientifically formulated for the control of corrosion in both closed cooling systems and chilled water systems.
If you require product selection assistance or technical advice please contact us.
Achieving superior results across a range of typical problems, Accepta 2107 incorporates a highly effective combination of ferrous and non-ferrous corrosion inhibitors, a non-carbonate buffer, scale inhibitors and dispersants.
Additionally, Accepta 2107’s multi-functional formulation incorporates an leak detection tracer dye for improved monitoring and control procedures.
Product Benefits
- High performance multi-functional corrosion inhibitor
- Suitable for corrosion control in closed cooling and chilled water systems
- Corrosion inhibitor for ferrous and non-ferrous materials
- Non-carbonate buffer
- Scale inibitor
- Dispersant
- Leak detection tracer dye
Product Properties
Form: | Liquid |
Colour: | Red |
Odour: | None |
Specific gravity: | 1.095 – 1.125 (25 °C) |
Boiling point: | 100 oC |
pH: | 11.0 – 12.0 (100%) |
Solubility in water: | Complete |
Vapour pressure: | Same as water |
Freezing point: | -29 °C |
Boiling point: | 100 °C |
*Full details of the product properties are available in the Accepta MSDS.
Application & Dosage Information
The recommended dosage of Accepta 2107 is 15.6-23.4 l/m3 of system capacity or 60.6-87 l of Accepta 2107 /3785 l of system capacity in all systems.
Clean-up the system if the system becomes contaminated with iron.
Maintain 600-750 ppm nitrite as NO2.
Important – Accepta 2107 is intended for industrial use only. It should NOT be fed to potable water systems.
Our technical consultants will advise you of the ideal level of dosage and testing regime for your individual system
It is advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.
Contact Accepta technical support for additional technical advice.