Boiler Water Test Kit – Water Analysis Equipment

£615.00 ex. VAT


Lead time on hard case test kits can be up to 7 working days.

Description below


Boiler Water Test Kit – Water Analysis Equipment

Accepta’s high performance boiler water test kit has been specially developed for engineers, water treatment professionals; and building services and facilities management specialists with a responsibility for the management of boiler installations.

Accepta’s professional boiler water test kit allows boiler operators, engineers and water treatment professionals to perform quick and accurate in-field boiler water testing and analysis procedures for a range of important system parameters.

Boiler water and boiler feed water systems require careful testing and monitoring to ensure the correct water conditions are maintained at all times.

Failure to maintain the correct water treatment programme can lead to serious problems including reduced boiler efficiency, accumulation of scale, corrosive water conditions and reduced steam purity.

Accepta’s comprehensive boiler water test kit has been developed specifically for engineers and water treatment professionals involved with the maintenance and management of boilers and boiler systems.

This self-contained professional water analysis testing kit will allow you to perform a range of tests essential to maintain boilers at optimum performance.

Key Benefits

  • Ideal for boiler engineers and water treatment professionals
  • High quality, professional standard equipment
  • Comprehensive range of components allowing full range of tests to be performed.
  • Rugged, compact and portable design.

Key Treatment Parameters

This boiler water kit will test for the following parameters:

Parameter Range
Conductivity/TDS 0-19,999µS
pH 0.00 – 14.00 pH
Alkalinity P 0 – 2,400ppm
Alkalinity M 0 – 2,400ppm
Alkalinity OH 0 – 2,400ppm
Hardness Total LR 0 – 50ppm
Hardness Stop/Go 0 – 4ppm
Chloride 0 – 3,000ppm
Sulphite 0 – 150ppm
Phosphate 0 – 80ppm

Note: Range is dependent on measuring instrument used.

Accepta’s professional boiler water test kit is presented in its own robust carry-case and includes all the equipment and reagents necessary to perform between 100 and 200 tests required to effectively test and monitor system waters to ensure optimum operating conditions are achieved and maintained.

Replacement reagents and other components are available.

Failure to maintain the correct levels and dosing of the chemical treatments can lead to:

  • Corrosion of the system (leaks)
  • Formation of scale (blocked pipes)
  • Increased biological activity

Boiler Water Test Kit Contents

Plastic Robust Case with Foam
Waterproof Instructions
1 x 20ml Luer Lock Syringe
1 x 10ml Luer Lock Syringe
1 x Filter Holder 25mm
1 x Filter Paper GF/C (50)
2 x 65ml Test Bottles
1 x Comparator
2 x 10ml Comparator Cells
1 x 10ml Testing Tube
Pocket pH1 Meter
Pocket Conductivity/TDS/Temp/Salinity Meter
Alkalinity p (Drop Test)
PA1 (65ml)
PA2/TA2 (65ml)
TA3 (65ml)
Alkalinity M (Drop Test)
TA4 (65ml)
PA2/TA2 (65ml) (Already in other test)
TA3 (65ml) (Already in other test)
Alkalinity OH (Drop Test)
PA3 (65ml)
PA2/TA2 (65ml) (Already in other test)
TA3 (65ml) (Already in other test)
Hardness Total LR (Drop Test)
TH2 (65ml)
TH5 (65ml)
TH3 (65ml)
Hardness Stop/Go (Drop Test)
Stop/Go Reagent (65ml)
Chloride (Drop Test)
BC1/CC1 (65ml)
BC2 (65ml)
CC2 (65ml)
Sulphite (Drop Test)
SO1 (65ml)
SO2 (65ml) Phosphate (Comparator)
PB1 (65ml)
PB2 (65ml)
Calibration Solutions for Pocket Meters
Standard Conductivity 1413mS (65ml)
pH 4 (65ml)
pH 7 (65ml)
pH 10 (65ml)
20% Acetic Acid (65ml)

Technical Support

If you require additional information or specialist technical support concerning our professional boiler water test kits please contact Accepta’s technical support team.

Additional information

Weight 3 kg