English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Scale & Corrosion Inhibitor for Galvanised Steel Cooling Towers - Bottle

Scale & Corrosion Inhibitor for Galvanised Steel Cooling Towers - Bottle

Accepta 6016 is a high performance, highly concentrated solid chemical cooling water treatment scientifically formulated to treat and protect galvanised steel cooling towers from white rust conditions.

Accepta 6016 is suitable for use in both new installations and systems that must be routinely passivated. It uses the very latest anti-scaling and corrosion inhibition technologies.

Accepta 6016 corrosion inhibitors combine with conventional chemistry to provide system protection via passivation.

Accepta 6016 contains ortho phosphate, polymer dispersant and triazole.

Accepta 6016 is available in fully recyclable plastic bottles each containing 5kg of concentrated solid chemical.

Accepta 6016 is packaged in cases containing 4 x 5kg bottles.

Each case weighs 20kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance scale and corrosion inhibitor
  • Ideal for protecting galvanised steel cooling towers from white rust conditions
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: White amorphous blend
Odour: No odour
Softening point: Not applicable
Bulk density: 1197 kg/m3
Solubility in water: Complete at ambient temperatures
pH (1% solution): ~9.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

At a dosage rate of 250 ppm the parameters identified in the table below should be met during the passivation period.

Operators should also refer to the tower manufacturers guidelines for additional detail.

Water Quality Range Dosage Test Range
pH Calcium Alkalinity Chemical level in recirculating water Ortho PO4
6.5 - 8.0 100 - 300ppm 100 - 300ppm 250 ppm 100 ppm

At a dosage rate of 20 ppm, 1 case of Accepta 6016 is equivalent to approximately 227kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Testing & Control

Ortho phosphate test kits suitable for monitoring and controlling the use of Accepta 6016 are available from Accepta.


Feed Accepta 6016 using an Accepta 6016 board system.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

For further technical assistance concerning Accepta 6016 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 6016 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 6016

Popular Solid Chemical Treatment Products

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.