Accepta 6001 is a high performance, highly concentrated solid chemical cooling water multi-functional scale and corrosion inhibitor scientifically formulated for the treatment and protection of cooling water systems operating under “stressed”, high water hardness conditions. Accepta 6001 uses the very latest anti-scaling, anti-fouling and corrosion inhibition technologies.
Accepta 6001 scale dispersant and corrosion inhibitors work with conventional chemistry to provide system protection at low product dosage rates.
Accepta 6001 contains PBTC phosphonate, HEDP phosphonate, polymaleic acid, Ter-polymer, HPA and triazole.
Accepta 6001 is a concentrated solid chemical available in fully recyclable plastic bottles each containing 5.5kg of product.
Accepta 6001 is packaged in cases containing 4 x 5.5kg bottles.
Each case weighs 21.8kg.
- Innovative solid chemical technology
- High performance multi-functional scale and corrosion inhibitor cooling water treatment
- Provides system protection at low product dosage rates
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Tan to brown amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 - 55 oC|
|Bulk density:||1098 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||7.5 – 8.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6001 can be used in cooling tower water systems using the following dosage rates. The application rates provided below are based on set water stability indices, however in practice, dosage rates should be set to suit individual water conditions.
|Water Quality Range||Dosage||Test Range|
|Ryzner Stability Index||Calcium||Alkalinity||Chemical level in
|6.0 – 4.0||200 - 500 ppm||200 – 500 ppm||15 – 25 ppm||3 – 5 ppm|
|4.0 - 3.0||500 - 800 ppm||500 - 600 ppm||25 –40 ppm||4 – 6 ppm|
|< 3.0||800+ ppm||600+ ppm||40+ ppm||6 – 8 ppm|
Note - with comparative liquid products, at a dosage rate of 20 ppm, 1 case of Accepta 6001 is equivalent to approximately 227kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.
Testing and Control
Organo-phosphonate specific test kits suitable for monitoring and controlling the use of Accepta 6001 are available from us.
Feed Accepta 6001 using an an Accepta board system.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6001 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6001 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: