Accepta 6061 is a high performance, highly concentrated polymeric based solid chemical water treatment product scientifically formulated for the on-line cleaning and removal of scale from both cooling water systems and boiler water systems.
Accepta 6061 is an on-line cleaner and scale remover for both cooling and boiler water systems that helps to remove scale build-up in water systems using the dispersion method (as opposed to acidic chelation).
Accepta 6061 is designed to supplement boiler and cooling system scale and corrosion inhibitors and offers an excellent alternative to the use of dangerous mineral acids.
|Polymer vs Acid||Improves use, handling & shipping safety|
|Eliminates exposure to hazardous chemicals|
|Eliminates risk of cleaning-related corrosion|
|No need for system shut-down||Eliminates cost of down-time and start-up|
|Eliminates need for re-passivation|
|No need to raise system water temp to clean||Energy savings|
|No spent acid||Eliminates waste treatment & disposal cost|
Accepta 6061 is thermally stable and can be used in both boilers and cooling water systems.
Accepta 6061 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation.
Accepta 6061 is available in fully recyclable plastic bottles each containing 5kg of concentrated solid chemical.
Accepta 6061 is packaged in cases containing 4 x 5kg bottles.
Each case weighs 20kg.
- Innovative solid chemical technology
- High performance on-line cleaner and scale remover for cooling and boiler water systems
- Helps to remove scale build-up in water systems using the dispersion
- Supplements boiler and cooling system scale and corrosion inhibitors
- Excellent alternative to the use of dangerous mineral acids
- Thermally stable
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 - 55oC|
|Bulk density:||998 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||8.0 - 8.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Application rates for Accepta 6061 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation. will vary from 20 – 2000 ppm in the system water depending on the severity of the scale/deposit build-up,
When cleaning heavily fouled systems care should be taken to prevent clogging of screens, strainers, and lines. Under such circumstances it may be advantageous to use Accepta 6061 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation. in conjunction with a side stream filter.
Feed Accepta 6061 using an Accepta board system.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6061 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6061 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: