Accepta 6054 is a high performance, highly concentrated solid form multi-functional boiler water treatment product scientifically formulated for the protection and treatment of boiler systems operating under soft water conditions.
Accepta 6054 is a versatile boiler water treatment product incorporating corrosion inhibitors, scale inhibitors and alkalinity builders.
Accepta 6054 is suitable for use in boiler systems under soft water make-up applications. It also contains additional sulphite making it suitable for use in systems where no de-aerator or heater is available.
All components of Accepta 6054 conform to US FDA Title 21, Section 173 Boiler Water Additives.
Accepta 6054 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.
Accepta 6054 is packaged in cases containing 4 x 5.5kg bottles.
Each case weighs 21.8kg.
- Innovative solid chemical technology
- High performance multi-functional boiler water treatment for soft water systems
- Incorporates corrosion inhibitors, scale inhibitors and alkalinity builders
- Suitable for systems with no de-aerator or heater
- FDA approved
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Near black amorphous solid|
|Bulk density:||1197 kg/m3|
|Solubility in water:||20 - 25% at ambient temperatures|
|pH (1% solution):||~10.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
1kg of Accepta 6054, dosed at a rate of 60 ppm will treat approximately 36,675lbs of boiler blowdown.
One case of Accepta 6054 (21.8kg) is equivalent to 114kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.
Testing & Control
|Testing||In Boiler Water
|Sulphite||20 – 30 ppm|
|p-Alkalinity||250 – 600 ppm|
|Conductivity||See manufacturers guidelines|
Test kits suitable for monitoring and controlling the use of Accepta 6054 are available from Accepta.
Feed Acepta 6054 using an Acepta board system.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6054 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6054 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: