English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Low Foaming Biodispersant & Penetrant for Cooling Towers & Cooling Water Systems - Bottle

Low Foaming Biodispersant & Penetrant for Cooling Towers & Cooling Water Systems - Bottle

Accepta 6029 is a high performance; highly concentrated solid chemical low foaming biodispersant and penetrant scientifically formulated for the treatment of cooling towers and cooling water systems. Accepta 6029 assists in the prevention and removal of organic materials and foulants.

Accepta 6029 is engineered to supplement cooling system inhibitor / dispersants and biocides to maintain clean surfaces in cooling towers and heat transfer equipment.

Accepta 6029 works to penetrate the matrix of organic surface deposits which are broken up and then disperse. Accepta 6029 can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems.

Accepta recommended that Accepta 6029 is used in conjunction with Accepta biocides to help maintain a clean system. There is also a lower tendency for agglomeration with anionics than typical ADBAC quaternary compounds.

Accepta 6029 is available in fully recyclable plastic bottles each containing 4.1kg of concentrated solid chemical.

Accepta 6029 is packaged in cases containing 4 x 4.1kg bottles.

Each case weighs 16.4kg.

Product Benefits

  • Innovative solid chemical technology
  • High performance low foaming biodispersant and penetrant
  • Ideal for cooling towers and cooling water systems
  • Assists in the prevention and removal of organic materials and foulants
  • Can also be used as a general corrosion inhibitor and cleaner for heavily fouled systems
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Softening point:
Bulk density:
Solubility in water:
pH (1% solution):

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 6029 should be fed at a rate of 20 ppm. Increase this dosage rate for fouled systems or during initial start-up/charging of the system.

Always feed a biocide to kill bacteria and algae in the system.

When using Accepta 6029 to clean heavily fouled systems, care should be taken to prevent clogging of screens and strainers.

Please note that this product may cause foaming when fed at high levels.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

Testing & Control

ATP or colony count test kits suitable for monitoring and controlling the use of Accepta 6029 are available from Accepta.


Feed Accepta 6029 using an Accepta board system.

For further technical assistance concerning Accepta 6029 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 6029 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 6029

Popular Solid Chemical Treatment Products

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.