Accepta 3538 is a high performance solvent based, self-emulsifying cleaner designed, researched and developed to carry forward the concept of solvent degreasing into an environmentally conscious world.
Traditional solvent and water based emulsifying cleaners and degreasers produce stable emulsions with oils and greases which are subsequently rinsed to drain. Current environmental legislation regarding effluent discharges to surface drains, limits the discharge of oils and other hydrocarbons to 15 ppm.
Using Accepta 3538 will enable you to meet that 15ppm limit on hydrocarbons and oils for discharge.
A highly efficient emulsifying cleaner and degreaser with a quick break action means that the oils and greases are emulsified for rinsing but the resulting emulsion is unstable and breaks back to form an easily disposable supernatant waste.
- High performance self-emulsifying cleaner and degreaser
- Quick break emulsifier system which meets the most stringent legislation
- Highly efficient cleaning product
- Meets 15ppm limits
- Enables hydrocarbons and oils to be discharged
|Boiling point:||160 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 3538 can be applied by brush or spray directly onto soiled areas.
After allowing a dwell time of up to 5minutes for Accepta 3538 to work, the emulsion should be rinsed with hot or cold water at a typical water pressure of 80-100 psi.
Rinse water and waste should be allowed to dwell up to 30 minutes in an oil/water separator before discharge of the aqueous layer.
At suitable intervals the supernatant oil should be removed by qualified waste contractors from the break tank/separator.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 3538 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 3538 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: