Accepta 2614 is a high performance all-in-one scale and corrosion inhibitor developed for the protection and treatment of cooling water systems.
Accepta 2614 is scientifically formulated from a blend of polymeric and zinc corrosion and scale inhibitors, and is designed for use in open recirculating cooling systems.
Accepta 2614 is formulated for use in plants where one-drum programmes are preferred.
- High performance all-in-one scale and corrosion inhibitor cooling water treatment
- Formulated from polymeric and zinc corrosion and scale inhibitors
- Ideal for open recirculating cooling water systems
- Convenient single-shot liquid product
|pH:||1.0 - 1.5|
|Specific Gravity:||1.18 - 1.23|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The Target dosage range for Accepta 2614 is 0.5 - 2 ppm as Zn+2 in the recirculating cooling water.
Accepta 2614 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2614 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Zinc Checkit kit (comparator)
- Zinc Pocket colourimeter
Material of Compatibility
Safety, Storage & Handling
Accepta 2614 is an acidic solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2614 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: