Accepta 2321 is a high performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including re-circulating and once-through cooling water systems.
Accepta 2321 is a high specification product developed to improve the performance of cooling water systems where fouling by microbiological slimes is reducing overall system efficiency, by removing and dispersing the unwanted deposits.
Accepta 2321 is extremely effective at controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
- Powerful bio-dispersant
- Suitable for use in both re-circulating and once through cooling water systems
- Improves the performance of cooling water systems
- Improves system efficiency
- Removes and disperses unwanted deposits
- Controls oil based fouling
|Solubility in water:||Complete|
|Boiling point:||~100 0C|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2321 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
Accepta 2321 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for Accepta 2321 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2321 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2321 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: