Accepta 8010 is a high performance oil and bio-dispersant scientifically formulated for the treatment of cooling water systems including re-circulating and once-through cooling systems.
Accepta 8010 is also extremely effective at controlling oil based fouling.
Accepta 8010 comprises a solution of a powerful surface active agent that improves the performance of cooling systems, where fouling by microbiological slimes is reducing efficiency. Accepta 8010 does this by removing and dispersing the deposits.
Accepta 8010 is effective in both re-circulating and once-through cooling systems.
- Highly effective bio-dispersant for re-circulating and once-through cooling systems
- Improves cooling system performance where microbiological slimes are reducing efficiency
- Extremely effective at controlling oil based fouling
|Colour:||Clear yellow to colourless|
|pH:||>5.0 - 7.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 8010 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
Accepta 8010 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for Accepta 8010 will be in the range of 1- 1 00ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 8010 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: