Accepta 2332 is a high performance low nitrite - molybdate corrosion inhibitor scientifically formulated for the treatment of closed circuit systems including closed chilled water and low pressure heating systems.
Based on a blend of organic and inorganic corrosion inhibitors Accepta 2332 is proven to provide superior protection for steel, copper and other non-ferrous metals.
Accepta 2332 is a highly efficient formulation providing the ideal treatment for closed chilled water and low pressure heating systems.
IMPORTANT - Accepta 2332 is NOT intended for use in systems containing Aluminium.
- Superior quality corrosion inhibitor
- Developed specifically for use in closed circuit systems
- Proven protection for steel, copper and other non-ferrous metals
- Ideal for closed chilled water and low pressure heating systems
|Solubility in water:||Miscible|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Typically Accepta 2332 should be dosed at 1.5-2.0 kg/m3 in order to give an active reserve of 55-75mg/L molybdate (as Mo04) and 410-560 mg/l (as NaNO2).
NOTE: Accepta 2332 is NOT intended for use in systems containing Aluminium.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2332 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2332 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: