Accepta 2529 is a high quality liquid chlorine formulation with an additional biodispersant scientifically formulated for use in a wide range of disinfection and sterilisation procedures.
Accepta 2529 contains 15% (150,000 ppm) sodium hypochlorite and can be used in the generation of hypobromous acid.
Accepta 2529 acts as an extremely effective oxidising biocide and contains biofilm dispersants.
- Extremely effective liquid chlorine oxidising biocide with biofilm dispersants.
- Broad spectrum biocide and disinfectant.
- Approved biocide for many applications.
|Composition:||Aqueous solution of sodium hypochlorite and surfactant|
|Colour:||Green / yellow|
|Specific Gravity @ 20°C:||1.256|
|pH:||12 - 14|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The dosage rate of Accepta 2529 will depend on the application.
The Health & Safety Executives ACoP L8 recommends 0.5 - 1.0ppm of chlorine or 1.0 - 2.0ppm of bromine for the continuous treatment of cooling towers.
L8 recommends 5 ppm chlorine for 5 hours when chlorinating cooling systems.
Always consider the pH as the effectiveness of chlorine decreases as the pH rises above 8.0.
Always consider the corrosive effects of high levels of chlorine.
Do not mix this product with acids. Many organic materials will react with chlorine.
Do not mix with sodium bromide solutions in open containers.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Select a test method suitable for the concentration being measured.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2529 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: