Accepta 2333 is a highly effective polymeric cationic microbiocide scientifically formulated for the treatment of cooling water systems.
NOTE: This product is no longer available and has been replaced by the following alternatives:
If you require product selection assistance or technical advice please contact us.
Accepta 2333 is a non-foaming microbiocide ideally suited for use in cooling water systems to control algae and aerobic and anaerobic bacteria over a wide pH range.
Accepta 2333 may also be used to control microbial problems in swimming pools.
- Excellent microbiocide for cooling water systems.
- Can be used alone or in combination with other non-oxidising biocides or chlorine release agents.
- Non-foaming product.
- Effective over a wide pH range.
|Appearance:||Almost colourless liquid|
|pH (1% aqueous):||~ 7|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Periodic dosage of Accepta 2333 is recommended to establish and maintain a reserve for 4 hours of 20-200ppm depending on the severity of the contamination.
Accepta 2333 can be used alone or in combination with other non-oxidising biocides or chlorine release agents.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2333 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: