Accepta 2608 is a high performance boiler water anti-foam scientifically formulated for use in boilers to prevent the production of foam within the boiler system.
Accepta 2608 is developed for prevent unwanted foaming within boiler systems.
- High performance boiler water antifoam.
- Offers excellent foam control.
- Convenient liquid product.
|pH:||6.5 – 8.5|
|Cloud Point:||21 - 27°C (70 - 81°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2608 is 0.5 – 5.0ppm as product in the boiler feed water, or as needed.
Accepta 2608 should be fed neat or as part of an appropriate mix to the boiler feedwater system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2608 following the above dosing strategy will prevent the production of foam in the boiler system thus reducing the potential for carry-over.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Not Applicable
Material of Compatibility
|MS :||Not recommended|
Safety, Storage & Handling
Accepta 2608 is a mildly alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2608 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: